9/19/2019 Mixer 4 Canali Xlr
The Shure SCM268E microphone mixer offers great value and features six transformers inside: four transformer balanced XLR microphone-level inputs, one transformer balanced XLR mic/line output, and one internal low stray field, toroidal power transformer.All the audio transformers provide protection from RF interference, prevent ground loops, and make the SCM268 exceptionally quiet. The internal toroidal power transformer means you no longer have to deal with that annoying 'wall wart'. Add to this a rugged half-rack chassis, with exceptionally solid rack mounting hardware - and the SCM268 will easily fit into the widest range of smaller applications.The SCM268 is ideal for Meeting rooms, Houses of worship, Broadcast, Educational paging and public address. If you want half a dozen transformers in a half-rack space, choose the SCM268.Show moreShow less.
All things being equal, there's no difference in sound quality on any of those three. However, things are not necessarily equal.An unbalanced feed is far more susceptible to outside interference than a balanced one. The RCAs are definitely unbalanced so use them only as a last resort, particularly if the cable run from your sub mixer to the main mixer is fairly long.Quarter inch can go either way. A TS connector (Tip-Sleeve-the ones sometimes called mono) are unbalanced.
The TRS variant (Tip-Ring-Sleeve-the ones often called stereo but that's wrong in this case) are balanced and fine.XLR is pretty much always balanced (unless wired up in a non standard way) but might present a different issue. Many mixers (but not all) use XLR for microphone level inputs only-others can take mic or line via XLR. It will depend on the main mixer in use whether this is an issue for you but, if this is the case, the main outs from your submix will almost certainly be line level and could overload a mic level input via XLR.So.definitely try to use a balanced feed but the exact choice will depend on what make and model your two mixers are. OP needs to be more specific. I'm guessing from the original post that we talking the connections for the runs form the 8x? To the next board? Also, OP needs to tell us if the XLR's on both boards are 'mic' i/o or 'line' i/o.There usually is no inherent advantage or disadvantage to balanced vs.
![]()
Unbalanced lines. It depends on the application Balanced lines are generally preferred for longer distance cable runs.Additionally, balanced line level is usually about 4x hotter signal ('+4dBu') then an unbalanced line level ('-10dBm')From what I can assume from OP's post, he is running his drum signals (mics? Line outs from drum synth?
DJ MIxer with a USB Interface. The Behringer Pro Mixer DJX900USB 4-channel DJ Mixer with USB audio interface has a powerful feature set that DJs of all levels will love. The DJX900USB's intuitive operation and built-in digital effects give you the tools to get your audience out onto the floor - and keep them there. I just got a Behringer UB1222FxPro for $150, it has 4 or 6 phantom powered XLR channels, 2 or 4 stereo channels, monitor out, efx bus, external audio bus, 7 band EQ, onboard effects, can be rackmounted, ships with ears and xlr main outs. I'm using it in my studio so now everything is hooked up and ready to roll.
) to an 8 input mixer feeding another board. I do have a submixer with a pair of line level XLR outs, (in addition to RCA) so it's possible the XLR outs are line level and not mic level. If the second boards XLR's are mic inputs that won't work, the +4 signal will be way too hot.If those are mic level, I think it would be better to use the unbalanced line outs to unbalanced line ins, because, more likely then not the submix is attenuating the signal to get it to mic level, and then the mic input on the second board has to amplify that signal, so you're adding two gain stages. But, given the choice, as long as you're matching mic to mic or line to line, give all a try and see which one sounds the best. K sorry about that. I've got 4 microphones into the XLR mic in on my mixer. Im taking that submix to another mixer.
The second mixers XLR's are mic inputs, however my first mixer has a switch by the XLR main outs to toggle between the +4 and mic level.also. It turns out all the 1/4 cables I have are TS unbalanced. Its funny cuz Im always looking at my adapters, seeing TRS connections, and I never bothered to check the actual cables. I just recently learned the difference. I have a 1/8' TRS cable with 2 1/4 adaptors on it, so now thats my only TRS cable. I gtg shopping.anyways, what was interesting, was that I plugged in an unbalanced TS cable to a line in on my first mixer, and its rather queit, and acompanied by a rediculous scratchy hum. Then I use my cute little TRS cable, and it sounds full and clean.
I have a Mackie Mixer that totally works with Balanced and Unbalanced cables. It is used, so Im not sure if something is wrong with it or not.Last question: exactly whats the difference between Line level and Mic Level? Simply putthe electrical output from a microphone (and a phono cartridge) is very small, often measured in microvolts. It therefore needs significant pre-amplification before adding to the mixer's buss.Pro (low impedance) microphones need to see an impedance of around 1kilohm.
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |